Samsung Q35 - Manual (Page 137)

7-17 Chapter 7. Recovering the Computer
Wired LAN Related
Q1 Function.
A is a function that activates the system in rest mode when a sig-
nal (such as ping or magic packet commands) arrives from network(wired
LAN).
To use function
1. Select My Network Environment > View Network Connections
from the Desktop.
2. Click the right button on the touchpad over Local Area Connection, and
select Properties.
3. Click Configure..., and select Power Management tab. Select 'Allow
this device to bring the computer out of standby ', then click OK.
Restart the system.
If the system in rest mode is activated when there is no received signal, use the
system after disabling function.
If you turn the power off when is disabled, the LAN LED con-
tinues to be lit up.
Connecting wired LAN while using wireless LAN may not execute LAN> function. Configure wireless LAN to 'Disable' to use
function.
1. Click on My Network Place> View network connections on the Desktop.
2. Right-click over Wireless Network Connection and select Disable.
Q2 When I connected 100Mbps wired LAN and the computer exits
standby/hibernate mode, a message informing 10Mbps wired
LAN connection appears.
A When the computer exits standby/hibernate mode, restoring the network takes
about 3 seconds. When the network is restored, it operates in 100Mbps.