Sub-Zero 424/O - Manual (Page 5)

5
M O D E L S 4 2 4 A N D 4 2 4 F S I N S T A L L A T I O N
A N T I - T I P B R A C K E T I N S T A L L A T I O N
An anti-tip bracket and hardware is provided
with the Wine Storage unit. The anti-tip
bracket must be installed on a solid base to
prevent tipover in case several loaded wine
shelves are extended at the same time.
M O D E L 4 2 4
The anti-tip bracket should be attached to the
wall behind the unit with the bracket flange
located immediately above the top of the unit.
Refer to illustration 1 below.
A smaller metal ‘countertop’ bracket is also
provided with the Model 424, for installations
that need to be modified to provide a secure
surface for attaching the bracket. This bracket
will secure the front of the unit to the under-
side of the countertop, above the unit. Refer to
illustration 2.
M O D E L 4 2 4 F S
If you are installing the Model 424FS in a
space deeper than 24
5 / 8 " (625), the anti-tip
bracket must be installed no more than 24 5 / 8 "
(625) deep, so it engages the unit properly. It is
important that this measurement be made
from the front surface of the door, to the back
of the anti-tip bracket. Refer to illustration 3
below.
To prevent the unit from tipping forward
and provide a stable installation, the unit
must be secured in place with the anti-tip
bracket.
1 / 4 " (6)
Anti-Tip
Bracket Countertop
Bracket
Anti-Tip Bracket
Illus. 1 Illus. 2 Illus. 3
M O D E L S
4 2 4 | 4 2 4 F S