Sub-Zero 424/O - Manual (Page 12)

12
S I T E P R E P A R A T I O N
Make sure that the finished rough opening
where the Wine Storage unit is to be installed
is properly prepared. Refer to the Installation
Specifications illustration for rough opening
dimensions, door swing clearance and electri-
cal placement for Models 427 and 427R.
IMPORTANT NOTE: To operate properly, the
door must open a minimum of 90 degrees.
Use a minimum 2" (51) filler in corner installa-
tions to assure a 90-degree door opening.
Allow enough clearance in front of the unit for
full door swing.
IMPORTANT NOTE: Make sure the floor under
the unit is level with the surrounding finished
floor.
M O D E L S 4 2 7 A N D 4 2 7 R I N S T A L L A T I O N
27"
(686)
ROUGH OPENING WIDTH
25"
(635)
ROUGH
OPENING
DEPTH
23 7 / 8 "
(606)
90˚
105˚
MAXIMUM
DOOR SWING
35" (889)
DOOR CLEARANCE
28" (711)
DOOR CLEARANCE
25 1 / 2 "
(648)
25 1 / 2 "
(648)
15 1 / 2 "
(394)
LOCATE ELECTRICAL
WITHIN SHADED AREA
E
4 1 / 2 "
(114)
2 1 / 2 "
(64)
ANTI-TIP BRACKET
FRONT VIEW
TOP VIEW
80" (2032)
ROUGH OPENING
HEIGHT
TO FINISHED
FLOORING
79 1 / 2 " (2019)
MIN HEIGHT
REQUIRED
Do not load wine into the Wine Storage
unit until the installation is complete.
M O D E L S 4 2 7 A N D 4 2 7 R
I N S T A L L A T I O N S P E C I F I C A T I O N S
NOTE: Door swing clearances are based on stainless
steel door and handle dimensions.
M O D E L S
4 2 7 | 4 2 7 R