Sony VPL-BW5 User Manual
Page 57
57
Oth
e
rs
a (M) = {(PS Ч 37.252) Ч 0.97}
–
31.7
b = x – {PS × 4.465 + (a + 31.7) × 0.1405 – 4.5}
c = x
–
{PS × 4.465 + (a + 31.7) × 0.1405
–
4.5 + 90.5}
• The projected image size is the one when “Wide Mode” in the INPUT SETTING menu is set to
“Full 2”. When “Wide Mode” in the INPUT SETTING menu is set to the mode other than “Full
2”, black bands may appear at the top and bottom or right and left of the screen.
• When “Wide Mode” in the INPUT SETTING menu is set to “4:3”, the projected image size
(diagonal) will be approximately 88 % of “Full 2” size.
• When “Wide Mode” in the INPUT SETTING menu is set to “16:9”, the projected image size
(diagonal) will be approximately 97 % of “Full 2” size.
The alphabetical letters in the charts and calculation methods indicate the following.
PS: projected image size measured diagonally (inches)
a:
distance between the screen and the center of the lens
b:
distance between the floor and the center of the lens
c:
distance between the floor and the adjusters of the projector
x:
free
N: minimum
M: maximum
Notes