beautypg.com

Positioning the projector and a screen, Positioning the projector and a, Screen – Sony VPL-BW5 User Manual

Page 16

background image

16

The installation distance between the projector and a screen varies depending on the size
of the screen.

1

Determine the installation position of the projector and screen.

When “Wide Mode” in the INPUT SETTING menu is set to “Full 2”

Unit: m (feet)

There may be a slight difference between the actual value and the design value shown in
the table above.

• When “Wide Mode” in the INPUT SETTING menu is set to the mode other than “Full 2”, black

bands may appear at the top and bottom or right and left of the screen.

• When “Wide Mode” in the INPUT SETTING menu is set to “4:3”, the projected image size

(diagonal) will be approximately 88 % of “Full 2” size.

• When “Wide Mode” in the INPUT SETTING menu is set to “16:9”, the projected image size

(diagonal) will be approximately 97 % of “Full 2” size.

For details on installation, see “Installation Diagram” on page 56.

Positioning the Projector and a Screen

Projected image size
(diagonal) (inches)

40

80

100

150

200

250

300

Minimum Distance

1.2

(3.9)

2.5

(8.2)

3.1

(10.2)

4.6

(15.1)

6.2

(20.3)

7.7

(25.3)

9.3

(30.5)

Maximum Distance

1.5

(4.9)

2.9

(9.5)

3.7

(12.1)

5.6

(18.4)

7.4

(24.3)

9.3

(30.5)

11.1

(36.4)

Notes on Wide Mode settings

Distance between the screen and
the center of the lens

Screen

* Adjuster not stretched, and the V Keystone function has been done.

Side view

This manual is related to the following products: