Turning off the power – Sony VPL-BW5 User Manual
Page 27
27
Pr
oj
ec
ting
The ?/1 (On/standby) switch flashes in
green, then lights in green.
The projector cannot be used while the
?/1 switch is flashing.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT repeatedly to
select the input you want to
project on the screen.
Each time you press the button, you can
select the input in the following
sequence.
• If “Auto Input Search” is set to “On,” the
projector searches for the signals from
the connected equipment and displays
the input channel where the input signals
are found. (
• When the analog signal is input from a
computer, the Smart APA (Auto Pixel
Alignment) feature adjusts the picture of
the connected equipment to its clearest.
• Depending on the type of your computer,
for example a notebook, or an all-in-one
LCD type, you may have to switch the
computer to output to the projector by
pressing certain keys (e.g.,
, etc.), or by
changing your computer’s settings.
The key used for switching the computer
to output to the projector varies
depending on the type of computer
1
Press the
?/1
switch.
A message “POWER OFF? Please press
?/1 switch again.” appears on the
screen.
The message disappears if you press any
button other than the
?/1
switch, or if you
do not press any button for five seconds.
2
Press the
?/1
switch again.
The ?/1 switch flashes in green and the
fan continues to run to reduce internal
heat. Also, the ?/1 switch flashes
quickly for the first 60 seconds. During
this time, you will not be able to light up
the ?/1 switch again with this switch.
3
Unplug the AC power cord from
the wall outlet after the fan stops
running and the
?/1
switch
lights in red.
To view the picture from Press INPUT
to display
Computer/Component
connected to the INPUT
A connector
Input-A
Computer/VCR, etc.
connected to HDMI
(digital) connector
HDMI
Video equipment
connected to the VIDEO
INPUT connector
Video
Video equipment
connected to the
S VIDEO INPUT
connector
S-Video
Notes
Input-A
t HDMI t Video t S-Video
VGA
LCD
/
/
,
Turning Off the Power
Note
F7
Fx
Fn
or
and