Sony VPL-BW5 - Manual (Page 52)

52
Specifications
Optical characteristics
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.59-inchvWXGA panel, about
3,070,000 pixels (1280 Ч 800 Ч
3)
Lens 1.2 times zoom lens
f 18.53 to 22.18 mm/F1.65 to 1.93
Lamp 190 W Ultra high pressure lamp
Projected picture size
40 to 300 inches (measured
diagonally)
Light output
1)
2000 lm
1)
When the Lamp Mode is set to “High.”
Throwing distance
2)
40-inch: 1.2 to 1.5 m
(3.9 to 4.9 feet)
80-inch: 2.5 to 2.9 m
(8.2 to 9.5 feet)
100-inch: 3.1 to 3.7 m
(10.2 to 12.1 feet)
150-inch: 4.6 to 5.6 m
(15.1 to 18.4 feet)
200-inch: 6.2 to 7.4 m
(20.3 to 24.3 feet)
250-inch: 7.7 to 9.3 m
(25.3 to 30.5 feet)
300-inch: 9.3 to 11.1 m
(30.5 to 36.4 feet)
2)
When placed on the floor, the adjuster not
stretched, the V Keystone function has been
done, and “Wide Mode” in the INPUT
SETTING menu is set to “Full 2.”
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system NTSC 3.58 /PAL/SECAM/
NTSC 4.43 /PAL-M/PAL-N/
PAL60 system, switched
automatically/manually
(NTSC
4.43 is the color system
used when playing back a video
recorded in NTSC on a
NTSC
4.43 system VCR.)
Resolution 750 horizontal TV lines (video
input)
1280 × 800 dots (RGB input)
Acceptable computer signals
3)
fH: 19 to 92 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
SXGA+ 1400
× 1050
fV: 60 Hz)
3)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB/component 50/60 Hz,
Progressive component 50/60
Hz, DTV (480/60i, 575/50i,
480/60p, 575/50p, 720/60p,
720/50p, 1080/60i, 1080/50i),
Composite video, Y/C video
Input/Output
VIDEO IN VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-
pintype
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
Vp-p ±2 dB (NTSC) (75 ohms
terminated), burst 0.3 Vp-p ±2
dB (PAL) (75 ohms terminated)
INPUT A RGB: HD D-sub15-pin (female)
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
HD: Horizontal sync input: TTL
level, positive/negative
VD: Vertical sync input: TTL
level, positive/negative
HDMI Digital RGB/Y C B
(P
B
) C
R
(P
R
)
SERVICE RS-232C: D-sub 9 pin
General
Dimensions 314
Ч 109 Ч 269 mm (12 3
/ 8 Ч
4
3
/ 8
Ч 10 5
/ 8 inches) (w/h/d)
(without projecting parts)
Mass Approx. 3.0 kg (6 lb 10 oz)
Power requirements
AC 100 to 240 V, 2.6 to 1.1 A, 50/
60 Hz
Power consumption
Max.260 W (in standby: 3 W)
Heat dissipation