Samsung SCH-i730 - Manual (Page 65)

Section 6: Contacts 65
Understanding Your Contacts
Se
ct
io
n 6
Beam a Contact via IR
Your i730 is equipped with an infrared port (IR) which
allows you to send and receive information wirelessly
between two IR Pocket PC devices. To beam a contact:
1. Press to open Contacts.
2. Tap the desired contact from the list to view the
summary screen.
3. Tap Tools and select Beam Contact.
4. Align the ports between the two devices.
5. When the contact has been successfully transferred, tap
to exit.
Beam Contacts via IR without Confirmation
You can send and receive many contacts via IR without a
confirmation message. To beam many contacts at once,
follow these steps:
1. For the device that will receive the contacts, tap Start
and then select Settings.
2. Tap Connections and select Beam.
3. Tap Receive an infrared beam, which sets the device
to Beam Receive mode.
4. For the device sending the contact information, press
the Contact button to open Contacts.
5. Select the contacts from the list by dragging your pointer
across the entries you want.
6. Tap Tools and select Beam Contacts.