Siemens 3000 - Manual (Page 31)

Setting the handset
23
Step-by-Step
Setting the date and time
We recommend setting the date and time to ensure the
correct time/date is recorded for all calls. You can
choose between 12-hour display (am, pm) and 24-hour
display.
Check the date and time and reset from time to time
where applicable.
©
Open the menu.
D E [
Select and confirm the menu item.
D E [
Select and confirm the menu item.
o
Enter the date, e. g. 22.09.2002 = 220902.
D
Move the cursor down one line.
o
Enter the time, e. g. 19:05 = 1905.
D
Move the cursor down one line.
F
am
G
Define the display mode (am, pm).
Save the settings.
Determining direct call numbers
You must determine a direct call number to perform a
direct call. The room monitor number is used as the di-
rect call number. This number is then selected once you
activate the direct call key (
Æ page 8). The room moni-
tor function must be deactivated for this.
Enter the direct call number via the room monitor func-
tion (
Æ page 77).
You can store a direct call number in the redial list by
saving the number separately as "direct call" in your mo-
bile telephone’s telephone directory.
Store the direct call number as "direct call" in your mo-
bile telephone’s telephone directory (
Æ page 31).
Note:
Do not switch off the handset after you have
made the settings, otherwise the date and time
will be reset.
Calendar/Clock
Date/Time
Save