Sanyo VCC-ZM400 - Manual (Page 9)

DISPLAYING/CLOSING THE MENU SCREEN
1 Press the SET button for about 3 seconds.
The MAIN MENU screen will appear.
2 Using the cursor button
1 Use the cursor button (l) to move the cursor down.
When the cursor reaches the bottom of the screen, it goes
back up to the top of the screen.
2 Use the cursor button (j) to move the cursor up. When
the cursor reaches the top of the screen, it goes back
down to the bottom of the screen.
3 Use the cursor button (c) to move the cursor to the right.
This button is also used to change ON/OFF settings etc.
4 Use the cursor button (d) to move the cursor to the left.
This button is also used to change ON/OFF settings etc.
3 Switching to sub-menu screens
Use the cursor button (j l d c) until an item with a “y”
next to it is flashing, then press the
SET button.
4 Closing a settings screen
• To return to the previous screen, use the cursor button (l)
to select BACK for MENU, then press the
SET button.
• To return to the normal screen, use the cursor button (d or
c) to select END for MENU, then press the SET button.
☞ Returning to the default setting
Use cursor button (l, then d or c) to change the PRESET
setting to ON, then press the SET button.
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
LANGUAGE
LANGUAGE ENGLISH
LANGUE FRENCH
IDIOMA SPANISH
MENU BACK
MAIN MENU screen Sub-menu screen
SET
Cursor button SET button
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
8