Sanyo VCC-ZM400 - Manual (Page 38)

VIEW SETTING
Backlight compensation additional settings 2
•••• 5 spot centerweighted average metering (CENT)
1 Use the cursor button (d or c) to select CENT, then
press the SET button.
The BLC SETTING (POSITION) screen will appear.
2 Use the cursor button (j l d c) to shift the position
of the central light sensing zone.
The zone can be moved up or down and left or right.
Note:
• If the zone fills the right side it will become smaller.
• If the zone fills the bottom side it will become smaller.
3
Press the SET button.
The BLC SETTING (SIZE) screen will appear.
4 Use the cursor button (j l d c) to adjust the size of
the central light sensing zone.
5 Press the SET button.
The BLC WINDOW WEIGHTING screen will appear.
1 2
IRIS SETTING
BLC CENT ‚
SENSE UP OFF
(LEVEL)
н-----ъ+------ь 40
PRESET OFF
MENU BACK
4
BLC SETTING
(SIZE)
BLC SETTING
(POSITION)
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
37