Sanyo VCC-ZM400 - Manual (Page 33)

MIRROR SETTING
1 Use the cursor button (j or l) to move the cursor to
MIRROR, then use the cursor button (d or c) to select
the mirror image effect (e.g. H).
The image will change as described below each time the
cursor button is pressed.
• OFF: Normal image • V: Inverted vertically
• H: Inverted horizontally • HV: Inverted horizontally and
vertically
2 To return to the normal screen, use the cursor button
(l) to select END at the bottom of the screen, then press
the SET button.
1
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
OFF H V HV
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
32