Sanyo VCC-ZM400 - Manual (Page 58)

OPTION SETTING
ADDRESS setting
1 Use the cursor button (j or l) to move the cursor to
SET for OPTION, then press the SET button.
The OPTION screen will appear.
Note: The PRESET ON setting cannot be used when OPTION
settings are in use.
2 Use the cursor button (j or l) to move the cursor to
ADDRESS, and then use the cursor button (d or c) to
select the address.
Available settings: 0 (d) – 127 (c)
☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
ALARM setting
A Alarm input setting (ALARM IN)
Make the following settings for alarm detection.
Connect the external alarm switch to the alarm input terminal on
the back of the camera.
1
Use the cursor button (j or l) to move the cursor to
SET for OPTION, then press the SET button.
The OPTION screen will appear.
Note: The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (j or l) to move the cursor to
SET for ALARM, then press the SET button.
The ALARM SETTING screen will appear.
3 Alarm input setting
Use the cursor button (j or l) to move the cursor to
ALM for ALARM IN, and then use the cursor button (d
or c) to set the input (e.g. ALM).
1 2
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
OPTION
CONTROL 485 ‚
ADDRESS 0
ALARM SET ‚
1 2
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
OPTION
CONTROL 485 ‚
ADDRESS 0
ALARM SET ‚
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
En
g
lis
h
57