Sanyo VCC-ZM400 - Manual (Page 27)

LENS SETTING (LENS)
7 LEVEL setting
Use the cursor button (j or l) to move the cursor to
LEVEL, use the cursor button (d or c) to select the level
setting (e.g. ADJ) and then press the SET button.
The LEVEL SETTING screen will appear.
Available settings:
• LOW: The mode switches when the luminance of the
objects being monitored is comparatively dark.
• MID: The mode switches when the luminance of the
objects being monitored is between the LOW and
HIGH levels.
• HIGH: The mode switches when the luminance of the
objects being monitored is comparatively bright.
• ADJ: The switching level for color mode to black & white
mode and for black & white mode to color mode
respectively can be set manually.
8 Use the cursor button (j or l) to move the cursor to
COLOR†B/W, and then use the cursor button (d or c)
to select the value.
Available settings: 1 – 7
Note:
• The larger the value, the darker the switching level.
• Changing the setting for one of the switching level settings
(from color mode to black & white mode or from black &
white mode to color mode) causes the other setting to
change also.
• Set the switching level from black & white mode to color
mode in the same way.
D/N SETTING - AUTO
AGC MAX GAIN +9·
DNR OFF
BURST OFF
FOCUS 1
LEVEL ADJ ‚
PRESET OFF
MENU BACK
7 8
LEVEL SETTING
(COLOR†B/W)
4
(B/W†COLOR)
4
PRESET OFF
MENU BACK
LEVEL SETTING
(COLOR†B/W)
4
(B/W†COLOR)
4
PRESET OFF
MENU BACK
L5AD2/US (VCC-ZM400) GB 2003, 2, 4
Eng
lish
26