Sony SPP-A2770 - Manual (Page 32)

Basics 32 US
1
Pick up the cordless handset
from the base unit.
2
Press (TALK) and wait until
“TALK” appears on the display
and the display also shows the
talk time in hours, minutes and
seconds.
The dialing keys light up.
You then hear a dial tone.
The IN USE lamp on the base
unit lights up.
If you hear five short error
beeps and “NO
CONNECTION” appears on the
display, move closer to the base
unit.
3
Dial the phone number.
4
When you’re done talking, press
(OFF) or replace the cordless
handset on the base unit.
The display turns off.
To make a call after checking the phone number
You can dial the phone number before pressing (TALK) or
(EZ ACCESS). If you make a mistake when dialing the phone number,
press (ERASE) to erase the number.
Basics
Making calls
VOL switch
I (HEADSET)
jack
(*TONE)
(HOLD)
(EZ ACCESS) (ERASE)
(CALL WAITING/FLASH)