Sony SPP-A2770 - Manual (Page 12)

Getting Started 12 US
1
Connect the telephone line cord to the LINE jack and to a
telephone outlet.
2
Connect the AC power adaptor to the DC IN 9V jack and to
an AC outlet.
“PF” flashes on the message counter*.
3
Raise the antenna. Make sure it points towards the ceiling.
* “PF” flashes on the message counter when you connect the base unit to the
AC outlet for the first time, or when the day and time is cleared or delayed
due to a power failure. To terminate the flashing of “PF,” set the clock
correctly; or press any button other than (ANSWER ON/OFF) on the base unit
(pages 21 to 22).
Connect the base unit
Step 2: Setting up the base unit (continued)
Hook the cord.
To DC IN 9V
To LINE
AC power adaptor
(supplied
AC-T133)
Telephone line cord
(supplied)
3
To an AC outlet
2
To a telephone
outlet
1