Southbend Turn-nado Gearhead Lathe w/ Dro 21" x 60" sb1046pf - Manual (Page 136)

-134-
For Machines Mfg. Since 3/11 Turn-Nado ® Gearhead Lathes P A R T S
Front Machine Labels
Motor: 15 HP, 440V, 3-Ph, 60 Hz
Full-Load Current Rating: 19.23A
Swing Over Bed: 18.11"
Distance Between Centers: 60"
Swing Over Cross Slide: 11.02"
Swing Over Gap: 27.95"
Cross Slide Travel: 11"
Made in Taiwan to South Bend Specifications
MODEL SB1057F
18" x 60" TURN-NADO ®
GEARHEAD LATHE w/DRO
MFG Date:
Serial No: ®
TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY WHILE USING THIS
MACHINE:
1. Read and understand manual before starting. 2. Always wear approved eye protection.
3. Make sure the machine is connected to a grounded power source.
4. Keep all guards in place.
5. DO NOT wear loose clothing, gloves, or jewelry; secure long hair and roll up long sleeves.
6. Disconnect power before service, maintenance, or adjustments.
7. DO NOT operate when tired or under the influence of drugs or alcohol. 8. Make sure the machine is properly adjusted/set up before starting.
9. Change cutting fluid regularly and avoid contact with skin.
10. Make sure workpiece is properly and securely held in the chuck and has safe clearance through full rotation before starting the lathe.
11. Never leave the chuck key in the chuck.
12. Never touch the chuck or workpiece when it is in motion.
13. Never leave the lathe running unattended. 14. Make sure long workpieces are properly supported.
15. Always use the proper speed rate for the material you are turning.
16. Do not allow children to have unsupervised access to the machine.
Compound Travel: 5.39"
Spindle Nose: D1-8
Spindle Bore: 3.15"
Spindle Taper: MT#7
Tailstock Taper: MT#5
Weight: 5170 lbs.
WARNING! !
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
All labels are shown at 100%
WARNING! !
ENTANGLEMENT
HAZARD
WARNING! !
EYE INJURY
HAZARD
Always wear ANSI
approved safety
glasses when using
this machine.
INJURY HAZARD
Do not use machine
if you have not read
the manual. Visit
southbendlathe.com
or call 360-734-1540
to get a manual.
WARNING! !
SB1057F Labels (B)
All labels are shown at 100%
WARNING! !
EYE INJURY
HAZARD
Always wear ANSI
approved safety
glasses when using
this machine.
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
INJURY HAZARD
chuck key from chuck
WARNING! !
Sheets (MSDS) for
safety information.
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
disconnect power
before adjusting or
servicing machine.
WARNING! !
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
WARNING! !
POISON/
BIOHAZARD
Refer to the cutting
fluid manufacturer’s
Material Safety Data
Sheets (MSDS) for
safety information.
WARNING! !
ENTANGLEMENT
HAZARD
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
Always wear ANSI
approved safety
glasses when using
this machine.
or call 360-734-1540
to get a manual.
WARNING! !
Only trained and properly
supervised personnel are
allowed to operate this machine.
If safe operation procedures are
not clearly understood, request
additional training from a
supervisor before beginning
operation.
NOTICE
ONE SHOT
OILER
bolt bef
or
e
enga
gin
g th
e
car
ria
ge
leadscr
ew
.
2 3
NOTICE
Loosen the
carriage lock
bolt before
engaging the
carriage
leadscrew.
4,8,12,16,20,24,
28,32,36,40,44,
48,56,60,72 Any Position
In.
Non-
Numbered
Position
Numbered
Position
1,2,3,4
Position
1,3 or 2,4
Position
1 Only 2,6,10,14,
18,22,26,
30,54
3,5,7,9,
11,13,15,
19,23,27
2½,3½,4½,
7½,11½,13½
2¼,2¾,
3¼,3¾
2
7 ∕ 8
1
2 3
4
Same as
Metric
Threads
ONE SHO
T
NOTICE
Factory must verify accuracy of this label
Located above
cutting fluid tank
access panel
SB1057F Labels (B)
WARNING! ! !
INJURY/SHOCK
HAZARD
To avoid shock or
accidental starting,
WARNING! !
INJURY HAZARD
Always remove
chuck key from chuck
immediately after
making adjustments
to avoid serious
personal injury.
All labels are shown at 100%
!
!
HAZARD
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
WARNING!
EYE INJURY
HAZARD
Always wear ANSI
approved safety
glasses when using
this machine.
SB1057F Labels (B)
WARNING! ! !
All labels are shown at 100%
WARNING! !
ENTANGLEMENT
HAZARD
Remove or secure
loose clothing, hair
or jewelry to reduce
the risk of serious
injury or death.
WARNING! !
EYE INJURY
HAZARD
Always wear ANSI
approved safety
glasses when using
this machine.
South Bend Lathe Co.
MODEL SB1057F
18" x 60"
TOOLROOM
LATHE
2101
2102
2103 2104
2105 2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2117
2116
REF PART # DESCRIPTION REF PART # DESCRIPTION
2101 PSB1046PF2101 MACHINE ID LABEL (SB1046PF) 2107 PSB1048PF2107 THREAD CHART
2101 PSB1047PF2101 MACHINE ID LABEL (SB1047PF) 2108 PSB1048PF2108 ONE SHOT OILER LABEL
2101 PSB1048PF2101 MACHINE ID LABEL (SB1048PF) 2109 PSB1046PF2109 MODEL NUMBER LABEL (SB1046PF)
2101 PSB1056F2101 MACHINE ID LABEL (SB1056F) 2109 PSB1047PF2109 MODEL NUMBER LABEL (SB1047PF)
2101 PSB1057F2101 MACHINE ID LABEL (SB1057F) 2109 PSB1048PF2109 MODEL NUMBER LABEL (SB1048PF)
2101 PSB1058F2101 MACHINE ID LABEL (SB1058F) 2109 PSB1056F2109 MODEL NUMBER LABEL (SB1056F)
2102 PSB1048PF2102 UNTRAINED PERSONNEL LABEL 2109 PSB1057F2109 MODEL NUMBER LABEL (SB1057F)
2103 PSBLABEL02HL DISCONNECT POWER LABEL HL 2109 PSB1058F2109 MODEL NUMBER LABEL (SB1058F)
2104 PSBLABEL06HL BIOHAZARD LABEL HL 2110 PSBLABEL04HL SAFETY GLASSES LABEL HL
2105 PSB1046PF2105 TOOLROOM SIZE LABEL (SB1046PF) 2111 PSBLABEL08HL ENTANGLEMENT HAZARD LABEL
2105 PSB1047PF2105 TOOLROOM SIZE LABEL (SB1047PF) 2112 PSB1048PF2112 CHUCK KEY LABEL
2105 PSB1048PF2105 TOOLROOM SIZE LABEL (SB1048PF) 2113 PSBLABEL01HL READ MANUAL LABEL HL
2105 PSB1056F2105 TOOLROOM SIZE LABEL (SB1056F) 2114 SB1322 SOUTH BEND NAMEPLATE
2105 PSB1057F2105 TOOLROOM SIZE LABEL (SB1057F) 2115 PSBPAINT01 SB GRAY TOUCH-UP PAINT
2105 PSB1058F2105 TOOLROOM SIZE LABEL (SB1058F) 2116 PSBPAINT02 SB LIGHT BLUE TOUCH-UP PAINT
2106 PSB1048PF2106 CARRIAGE LOCK LABEL 2117 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT