Sony MZ-R410 - Manual (Page 29)

29
Various ways of playback
Using the group
function (Group Mode)
The recorder can operate various
playback with a disc which has group
setting. For more information on group
mode, see “Recording tracks using the
group function (Group Mode Recording)”
(page 22).
Listening to tracks in a
specific group (Group Mode
Playback)
• Insert a disc with group settings.
1
Start playback.
2
Press GROUP for 2 seconds or more.
“ ” and “GP ON” light up in the
display and the group mode turns on.
Playback stops at the end of the last
track in the selected group.
For details on selecting another
group, see “Selecting and playing
groups (Group Skip Mode)”
(page 29).
z
• You can also change play mode (repeat play,
or shuffle play) in the selected group. After
the procedures here, follow the steps of
“Changing play modes” (page 30).
• In group mode, pressing . during the last
track of the group moves playback to the first
track of the group, and pressing
> twice
continuously during the first track of the
group moves playback to the last track of the
group.
To turn off the group function
Press GROUP for 2 seconds or more
again.
Note
In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated in
the display window on the recorder as
“GP --”. Within a group, the tracks appear in
their order on the disc, not their order within the
group.
Selecting and playing groups
(Group Skip Mode)
Operations are possible regardless of
whether group mode is on or off.
However, playback on the recorder will
differ, depending on whether group mode
is on or off.
• When group mode is on:
Playback starts from the first track of the
selected group and ends with the last
track in the group.
• When group mode is off:
Playback starts from the first track of the
selected group and ends with the last
track in the disc.
GROUP
ENTER > , .