Shindaiwa TRIMMER T242X - Manual (Page 6)

6
Specifications
Model T242X
Engine Type 2-stroke, single cylinder, air cooled, gasoline engine
Dry Weight (less attachment) 5.3 kg/11.7 lb.
Dimensions (L x H x W) mm 1740 x 355 x 320 mm / 68.5 x 13.2 x 12.6 in.
Bore x Stroke 33 x 28 mm (1.3 x 1.1 in.)
Displacement 23.9 cc (146 cu. in.)
Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Fuel Tank Capacity .69 L (23.3 oz.)
Carburetor Type Diaphragm-type carburetor
Spark Plug NGK BPM8Y
Spark Plug Gap 0.6 mm (0.024 in)
Torque 16.7 - 18.6 N∙m (148-165 in • lbf)
Air Cleaner Type Double-layer felt
Starting Method Recoil Starter
Stopping Method Slide switch
Transmission Type Centrifugal clutch
Engine Idle Speed 3,000 RPM
Clutch Engagement Speed 3,850 RPM
Wide Open Throttle Speed (W.O.T.) 9,600 RPM
Specifications are subject to change without notice.
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY; information on label varies by engine
FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions
output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in
the Maintenance Section of this manual.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later
The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine
Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system is EM and
TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative emissions
for California models may only be applicable to fuel tanks.