Slant/Fin Jaguar J-390 - Manual (Page 10)

Jaguar Model J-390 10
Mode
Display
Description & Temperature Display
Space heating supply water temperature could be
changed by pressing “Up/Down” button. Settable from
90˚F to 185˚F (steps of 1 F). The default valve is 176˚ F
Press “Enter” button to store. (see note 1)
Domestic hot water supply temperature could be changed
by pressing “Up/Down” button. Settable from
104˚F to 185˚F (steps of 1 F). The default valve is 176˚ F
Press “Enter” button to store.
(see note 2)
Domestic hot water tank temperature could be changed by
pressing “Up/Down” button. Settable from 104˚F to 160˚F
(steps of 1 F). The default valve is 140˚ F.
Press “Enter” button to store. (see note 3)
Temperature display shows actual
supply water temperature.
Temperature display shows actual
return water temperature.
Temperature display shows actual DHW tank temperature.
(if the water tank is equipped with sensor)
Temperature display shows actual flue gas temperature.
Temperature display shows actual outside temperature.
(boilers with outdoor sensor)
Table 2: Viewing and Changing Temperatures
Press “Select” button for viewing different modes on “Mode Display”
Notes:
1. For space heating mode “0” (boilers not utilizing outdoor sensor)
2. For DHW mode “2” (storage tank with Aquastat)
3. For DHW mode “1” (storage tank with sensor)
Table 2
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Table 2 Table 1
Table 3
Blinking
Blinking
Blinking