Connecting devices to the i/o port – Sierra Wireless PINPOINT X HSUPA User Manual
Page 34
Inputs, Relay Outputs, and Power Status
Rev 4.0 Oct.09
28
Tip:
The relays are only capable of switching small loads. If you need
a stronger signal, such as to open a door lock, you can connect the
PinPoint X’s relay to a stronger solenoid relay which has enough
power to cause the desired effect.
Connecting devices to the I/O Port
Note: Before you install the
PinPoint X in its final location, be
sure to cover all exposed wiring.
You can purchase an optional I/O Wiring Harness for the
PinPoint X which can be used to attach devices to the I/O port.
The harness has pre‐wired leads to allow you to customize
your own connections. The wires are paired and color‐coded.
Figure 5-3: PinPoint X I/O Port Diagram (not to scale)
Table 5-1: PinPoint X I/O Port Pin-out
1.
Analog Input 4
12.
Analog Input 3
2.
Analog Ground
13.
Analog Ground
3.
Analog Input 2
14.
Analog Input 1
4.
No Connect
15.
No Connect
5.
Reserved for future use
16.
Reserved for future use
6.
Com2 (for use with #7)
17.
Com1 (for use with #18)
7.
Normal Open Relay
18.
Normal Open Relay
8.
GND
19.
GND
9.
Digital Input 4
20.
Digital Input 3
10.
Ground
21.
Ground
11.
Digital Input 2
22.
Digital Input 1
GND
GND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
GND
GND
NC
NC
Rsv
Rsv
AIN3
AIN4
AIN1
AIN2
DIN1
DIN2
DIN3
DIN4
Relay 1
Relay 2
Com2
Com1
NO2
NO1
GND
GND