Tools required, Opening the sim slot, Remove the sim from the card – Sierra Wireless PINPOINT X HSUPA User Manual
Page 22: Ejecting the sim tray
Activating PinPoint X on your cellular provider
Rev 4.0 Oct.09
16
•
PC or laptop ‐ To configure the modem, you will need a
computer with an available Ethernet port or serial port.
Tools Required
•
Small Phillips screw driver ‐ The Phillips screw driver is
the one which is also called a plus (+) or X screw driver.
•
Slim stylus ‐ A PDA stylus, an unbent paperclip, or other
such item.
2. Opening the SIM Slot
a.
Unplug the PinPoint X power and all cables.
b.
Remove slot cover on the front of the PinPoint X to
reveal the SIM slot.
Figure 3-1: Slot Cover
3. Remove the SIM from the card
a.
Carefully remove the SIM card from the card you
received from your cellular provider.
4. Ejecting the SIM tray
a.
Using the tip of a PDA stylus, an unbent paperclip, or
other slim blunt item press the yellow button of the
SIM tray.
Tip:
The button is between two boards.
b.
Slide the tray out completely.
Figure 3-2: SIM tray button