beautypg.com

SMC Networks SMC8014W-G User Manual

Page 44

background image

a. Either the Gateway’s Private LAN IP address or Public LAN IP address can be

configured as the end point for the VPN tunnel. Select either [Protect Private
Lan] or [Protect Public Lan] to enable the entire Private or Public LAN to be

part of the VPN tunnel and the respective Gateway LAN IP address will
populate the [Intranet Address] and [Intranet Subnet Mask] fields.

b. Enter the [Local ID] which must match the “Remote ID” of the remote VPN end

point.

c. Enter the [Remote Gateway ID] which must match the “Local ID” of the remote

VPN end point.

d. Enter the [Remote Gateway Address]
e. Enter the [Pre-shared Key] which must match the “Pre-shared Key” value of

the remote VPN end point.

f. Enter the [IKE Life Duration] value

See also other documents in the category SMC Networks Hardware: