Samsung ML-1610 - Manual (Page 40)

U SING P RINT M ATERIALS
3.9
3
•Load transparencies in the tray with print side up, and the
top with the adhesive strip going first.
Notes:
• To prevent transparencies from sticking to each other, do not let
the printed sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
• Do not use transparencies that are separating from the backing
sheet.
•Load card stock with print side up, short edge first and
center of the tray.
•Load letterheads in the tray with the design face up, top
edge towards the printer.