Samsung ML-1610 - Manual (Page 39)

U SING P RINT M ATERIALS
3.8
Printing on Special Materials
1 Open the paper input tray.
2
Load the print material in the paper input tray. Do not mix
types. See the following directions to load each type of print
material.
•Load the envelopes in the tray with the flap side down.
The stamp area is on the left side and the end of the
envelope with the stamp area enters the printer first
and center of the tray.
Cautions: If you print 20 envelopes in succession, the surface of
the top cover may become hot. Please exercise caution.
•Load labels in the tray with print side up.
Note: To prevent labels from sticking to each other, do not let the
printed label sheets stack up as they are printed out.