SOYO SY-5S - Manual (Page 63)

BIOS Setup Utility SY-5STM
59
3-5.2 PNP/PCI Configuration Setup
PNP/PCI
Setup
Setting Description Note
If [Resources Controlled By] is set to [Manual]
PCI/ISA PnP Choose IRQ-# and
DMA-# assigned to
PCI/ISA PnP card.
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7
IRQ-# and
DMA-#
assigned to:
Legacy ISA Choose IRQ-# and
DMA-# assigned to
Legacy ISA card.
IRQ-3,4,5,7,9,10,
11,12,14,15
DMA-0,1,3,5,6,7
Edge PCI IRQ
Activated By: Level
Most PCI trigger-
signals are Level. Setting must
match PCI card.
Disabled PCI IDE
2nd Channel: Enabled
Allows you to use
the secondary IDE
port. Default
ISA Specifies the ISA
slot as IDE disk
controller. Not recommended PCI IDE IRQ
Map To:
PCI-AUTO Select this option for
Plug-and-Play. Default
If [PCI IDE IRQ Map To] field is set to [PCI-AUTO]
A Default
(recommended) Primary IDE
INT#:
A, B, C, D
Specifies the PCI
interrupt assigned to
the primary IDE hard
disk.
B Default
(recommended) Secondary
IDE INT#:
A, B, C, D
Specifies the PCI
interrupt assigned to
the secondary IDE
hard disk.