SOYO SY-5S - Manual (Page 30)

Quick Installation Guide SY-5STM
26
3. The BIOS Setup screen appears:
You are now ready to configure your system with the BIOS setup
program. Go to Chapter 3: BIOS SETUP
Or continue to Chapter1: INTRODUCTION and Chapter2:
HARDWARE SETUP for more information about your SY-5STM
Mainboard.
Step 15. Power Off
There are three possible ways to turn off the system:
1. Use the Shutdown command in the Start Menu of Windows
95/98 to turn off your computer.
2. Use the power off by hot-key function.
Press the Ctrl + Alt +
ß(BackSpace) 3-simultaneous key
combination to turn off your system.
(To activate the power off by hot-key function, in BIOS [Power
Management Setup] menu, set the [Hot Key Power Off] field to
[Enabled].)
3. Press the mechanical power-button and hold down for over 4
seconds, to shutdown the computer. If you press the power-
button for less than 4 seconds, then your system will enter into
Suspend Mode.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
LOAD SETUP DEFAULTS
LOAD BIOS DEFAULTS
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
Esc
F10
: Quit
: Save & Exit Setup
↑ ↓ → ←
(Shift) F2
: Select Item
: Change Color
Time, Date, Hard Disk Type…