Schneider Electric Gateway LUFP7 User Manual
Lufp7 telemecanique
Table of contents
Document Outline
- TeSys_Model_U
- English
- Gateway
- Introduction
- Hardware Implementation of the LUFP7 Gateway
- Signalling
- Software Implementation of the Gateway
- Introduction
- Gateway Configuration under PL7 PRO and SyCon
- Setting Up the Hardware Configuration under PL7
- Creating a Profibus-DP Network under SyCon
- Selecting and Adding the Profibus-DP Master Station
- Setting up the Gateway Description Files
- Selecting and Adding the Gateway to the Profibus-DP Network
- Editing and Configuring the Gateway
- Saving and Exporting the Profibus-DP Network Configuration
- Importing the Configuration of the Profibus-DP Ne
- Configuring the Gateway I/O under PL7 PRO
- Description of Services Assigned to Gateway Inputs/Outputs
- Validating and Saving the Configuration of the TS
- Allocating Symbols to the Gateway Inputs and Outputs
- Using and Monitoring the TSX PBY 100 Coupler Con
- Developing a Profibus-DP Application
- Gateway Initialization and Diagnostics
- Configuring the Gateway
- Connecting the Gateway to the Configuration PC
- Installing AbcConf
- Importing the Gateway Configuration
- Transferring a Configuration to the Gateway
- Monitoring the Content of the Gateway’s Memory
- Deleting a Modbus Slave
- Adding a Modbus Slave
- Changing the Periodic Data Exchanged with a Modbus Slave
- Deleting Aperiodic Parameter Data
- Changing a Modbus Slave Configuration
- Adding and Setting Up a Modbus Command
- Configuring the General Characteristics of the Gateway
- Adding a Broadcaster Node
- Appendix A: Technical Characteristics
- Appendix B: LUFP7 Gateway GSD File
- Appendix C: Default Configuration
- Appendix C: Default Configuration
- Appendix D: Sample Use under PL7 PRO
- Appendix E: Profibus-DP Data and Diagnostics
- Appendix F: Modbus Commands
- Appendix F : Concept and Quantum PLC
- Français