beautypg.com

Special vcr playback features, Tracking 3d sound – Samsung DVD-V2000 User Manual

Page 24

background image

43

42

The Tracking adjustment removes the white lines that sometimes
appear during playback because of slight differences in recording
decks. The TRK button will automatically align the recorded tracks
with the playback heads to solve this problem. You may also set
tracking manually.

1

Adjust Tracking Manually

During playback, press the TRK

or TRK

buttons to move the

white lines out of the picture.

1

1

While a videotape is playing, you can enjoy a variety of special
playback features, including Still, Frame Advance, Skip, Repeat, and
more. Press the Play button again to resume normal playback.

1

Still

From Play mode, press Play/Pause to still a single frame.

2

Frame Advance

From still mode, press SKIP/F.ADV to advance to the next frame.

3

Cue/Review

From Play mode, press F.Forward (

) or Rewind (

) to

cue/review at two speeds:
• Picture Search — Press and release to advance the tape

forward or backward at 5 times normal speed.

• Jet Search — Press and hold to advance the tape forward or

backward at 7 times normal speed.

4

Skip

From Play mode, press Skip/F.ADV to cue ahead exactly 30 seconds.
Press Skip repeatedly up to 4 times to cue ahead 2 minutes.

5

Repeat

From Play mode, press Repeat to review the last 5 seconds of tape
(SP mode).

6

Shuttle

From Play mode, Shuttle >> gradually increases the cue speed
from Double-Speed playback to Picture Search to Jet Search.
Shuttle << gradually slows down the tape, then goes into Slow
mode, Still mode, Reverse Picture Search and Reverse Jet Search.

Special VCR Playback Features

Press the DISPLAY button to see the

current status of the VCR deck, as well

as the tape counter position and

record speed.

3

3

PLAY

0:00:00 SP

Tracking

3D Sound

3D Audio is an enhanced audio mode that creates the illusion of
Surround Sound with only two speakers.

1

Open 3D Sound Menu

During playback of a DVD, press the 3D SOUND button on the
remote control.

2

Set 3D Sound

Press the up/down buttons to set “3D Sound” On or Off, then press
the 3D SOUND button to confirm your selection.

1

00005A DVD-V2000/XAC-Eng3 11/12/02 7:07 PM Page 42