Samsung DVD-V2000 - Manual (Page 11)

19 18
Auto Channel Memory will automatically seek and store all active
channels in your area.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “Channel”
Using the up/down and left/right buttons, move the selection cursor
to “Channel Setup”, then press ENTERto select.
3 Run “Auto channel memory”
Move the selection arrow to “Auto channel memory,” then press
ENTER to select.
• The DVD-VCR will automatically search for all available
channels in the selected Tuner Band. This procedure may take
a few minutes to complete.
• When finished, the lowest channel found will be displayed.
Auto Channel Memory
1,3
MAIN MENU
Channel Setup
RETURN ENTER
CHANNEL SETUP
Ant/Cable: [CABLE TV]
Auto channel memory
Channel add/delete
RETURN ENTER
Memorizing CH 07
. . . . . please wait . . . . .
Tuner Band Setting
This feature allows you to manually set the DVD-VCR’s tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “Channel”
Using the up/down and left/right buttons, move the selection cursor
to “Channel Setup”, then press ENTER to select.
3 Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
1
MAIN MENU
Channel Setup
RETURN ENTER
CHANNEL SETUP
Ant/Cable: [Cable TV]
Auto channel memory
Channel add/delete
RETURN
CHANNEL SETUP
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
RETURN
00005A DVD-V2000/XAC-Eng2 11/12/02 7:06 PM Page 18