Star Micronics SP2000 Series User Manual

Page 22

– 19 –

ENGLISH

7 Insert only the original (the upper

paper) into the slit of the auto cutter.
Insert the paper onto which you
wish to copy (the lower paper) be-
tween the platen and the auto cutter.

8 Pull on the edge of the paper to

remove any slack and then lower the
auto cutter.

9 Insert the paper through the paper

outlet and then replace the cover by
reversing the removal steps.
Note: When the paper end mark

appears on the paper, replace
the roll paper before it runs
out.

Fig. 6-16 Paper outlet of the front

cover

Fig. 6-17 Mounting the cover

Paper
outlet

Auto cutter