Star Micronics SP2000 Series User Manual

Page 20

– 17 –

ENGLISH

6-2-2. Loading the Paper

1 Lift the cover up approx. 3 cm. Hold

the cover tilted at this angle, then
pull it toward you to remove it.

2 Cut off the front edge of the roll

paper perpendicularly.

3 Confirm that the power of the printer

is turned on.

4 While observing the direction of the

roll, set the paper roll into the hol-
low as shown in Fig. 6-13.

Fig. 6-12 Removing the cover

Fig. 6-13 Setting the paper

Cover

Roll paper