Sony STRDG910 - Manual (Page 31)

31 GB
D:\CANNES\SONY_HA\JOB 2007\STR-
DG910\IM_910_CEL\Data_CEL\GB_data\GB03CON_STR-DG910-CEL.fm masterpage: Right
STR-DG910
3-094-430-31 (1)
Getting Star
ted
5: Preparing the receiver
and the remote
If your receiver has a voltage selector on the
rear panel, check that the voltage selector is set
to the local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord
to a wall outlet.
Connect the AC power cord to a wall outlet.
* Models of area code E2 only.
Notes
• The AC OUTLET on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component connected to the receiver’s AC
OUTLET does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or
TVs to this outlet. This may cause a malfunction. Setting the voltage selector
Connecting the AC power cord
VOLTAGE
SELECTOR
120V
220V
240V
AC OUTLET
SURROUND SURROUND BACK
R R
L L
EAKERS
FRONT B FRONT A
R R
L L
SPEAKERS
AC power cord
To the wall outlet
AC OUTLET *