Sanyo PLC-WL2503A - Manual (Page 32)

32
Store
To store the adjusted data, select
Store and then press the
Point ► or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
Mode free
To clear the stored data, select
Mode free and then press
the Point ► or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
 Note:
• Display area (H/V) can not be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected in
the PC System Menu (p.29).
• When input computer signal to the projector, PC adjust
will become available.
Reset
To reset the adjusted data, select
Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
This Mode has stored
parameters.
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
Computer Input
Mode free Menu
Vacant
Press SELECT button to
store adjusted data.
Press MENU button
to close this dialog
box.
Store Menu