Sanyo PLC-WL2503A - Manual (Page 24)

24
Sound Adjustment
1
2
Press the MENU button to display the On-Screen Menu.
Use the Point ▲▼ buttons to select Sound. Press the
Point ► or the SELECT button to access the submenu
items.
Press the VOLUME+/– buttons on the remote control or on
the top control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Press the MUTE button on the remote control to select On
to temporarily turn off the audio output from AUDIO OUT
terminal. To turn the sound back on, press the MUTE button
again to select Off or press the VOLUME +/– buttons. The
MUTE function is also effective for the AUDIO OUT jack.
Press the SELECT button to switch the Mute function On/
Off. When the sound is turned off, On is displayed. Press
the VOLUME +/– buttons again to turn the sound back on.
Use the Point ▲▼ buttons to select the desired submenu
item and press the SELECT button to access the
selected item.
Volume
Press the Point
►
button to turn up the volume; press the
Point ◄ button to turn down the volume.
Mute
Direct Operation
Menu Operation
Sound Menu
Volume Dialog Box
HDMI
ASPECT
Remote Control
VOLUME + button
VOLUME - button
MUTE button
Approximate level
of the volume.
Press the MUTE button to set the
Mute function On or Off. The dialog
box disappears after 4 seconds.
Basic Operation
Volume
Mute
Top Control
VOLUME +/- buttons