Sanyo PLC-WL2503A - Manual (Page 10)

10
Part Names and Functions
Top Panel
① ② ③
③ LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end. (pp. 63, 70)
② WARNING indicator
Emit a red light when the projector detects
abnormal condition. This also blinks red when
the internal temperature of the projector
exceeds the operating range. (pp. 60, 70)
① POWER indicator
It turns red when the projector is in the stand-by
mode.
It remains green while the projector is under
operation. (pp.18, 70)
Indicators
Top controls
① ② ③ ④
⑥ ⑤
① ON/STAND-By button
Turn the projector on or off (pp.18-20).
④ MENU button
Open or close the On-Screen Menu (p.21).
② Point ▲▼◄► ( VOLUME – / + ) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.21).
– Pan the image in Digital zoom + mode (p.36).
– Adjust the volume level (with Point ◄► buttons)
(p.24).
③ SELECT button
– Execute the selected item (p.21).
– Zoom in or out the image in the Digital zoom
mode (p.36).
⑤ KEySTONE button
Correct the keystone distortion. (pp.23, 46)
⑥ INPUT button
Select an input source (pp.27-28, 37-38)