Sonance TR - Manual (Page 3)

3
SONANCE SYMPHONY ® TR & TSQ
• If you’re using the speakers in stereo or as the front left/center/right speakers
in a home theater, pivot the woofer and/or tweeter directly towards the listen-
ing area. This will help the sound from the speakers blend into a solid sound-
stage even if the speakers are widely separated.
• If you’re using the speakers as surround channel speakers in a home theater,
you can create a more diffuse, spacious surround effect by aiming the woofers
and/or tweeters towards a wall or window, away from the listeners.
To Pivot the
Woofer:
Apply pressure on the
outer edge of the
tweeter support bracket,
as shown in Figure 8 .
Do not touch or apply
pressure to the woofer
cone.
To Pivot the
Tweeter:
Apply light pressure to
the plastic ring around
the outside edge of
the tweeter dome, as
shown in Figure 8. Do not touch or apply pressure to the tweeter dome.
Tweeter Level Control
The S625 TR , S624 TR , S623 TR and
S623 TSQ have a tweeter level control
switch (see Figure 9 ) that lets you
boost or cut the tweeter’s level by
3dB. This allows you to adjust the
speaker’s brightness to better match
your listening room or personal taste.
Once you have installed the speakers,
listen to a variety of music that you
are familiar with. If the music all
tends to sound too bright or dull, use
the Tweeter Level Control to compen-
sate. If some recordings sound dull and some sound bright the speaker is accu-
rately reproducing differences in the recordings, and you should leave the control
in the middle (0dB) position.
SPECIFICATIONS
S625
TR
Tweeter: 1" (25mm) Beryllium dome, Ferrofluid-cooled, pivoting
Woofer: 6½" (165mm) Beryllium cone, rubber surround, pivoting
Frequency Response: 40Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 watts minimum; 150 Watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Adjustments: ±3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" (248mm) x 5 3 /
16
" (132mm)
Cutout Diameter: 8 5 /
32
" (207mm)
Shipping Weight: 12 lbs. (5.45kg) Pair
S624
TR
Tweeter: 1" (25mm) Aluminum dome, Ferrofluid-cooled, pivoting
Woofer: 6½" (165mm) Coated carbon fiber cone, rubber surround, pivoting
Frequency Response: 43Hz – 20kHz ± 3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 watts minimum; 140 Watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Adjustments: ±3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" (248mm) x 5 3 /
16
" (132mm)
Cutout Diameter: 8 5 /
32
" (207mm)
Shipping Weight: 11 lbs. (5.0kg) Pair
S623
TR
Tweeter: 1" (25mm) Silk dome, Ferrofluid-cooled, pivoting
Woofer: 6½" (165mm) Carbon fiber cone, rubber surround, pivoting
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 Ohms nominal; 6 Ohms minimum
Power Handling: 5 watts minimum; 135 Watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Adjustments: ±3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" (248mm) x 5 3 /
16
" (132mm)
Cutout Diameter: 8 5 /
32
" (207mm)
Shipping Weight: 10 lbs. (4.5kg) Pair
S622
TR
Tweeter: 1" (25mm) Silk dome, Ferrofluid-cooled, pivoting
Woofer: 6½" (165mm) Polypropylene cone, rubber surround, pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 Ohms nominal; 6 Ohms minimum
Power Handling: 5 watts minimum; 125 Watts maximum
Sensitivity: 89dB SPL (2.83V 1 meter)
Dimensions (Dia. x Depth): 9¾" (248mm) x 5 3 /
16
" (132mm)
Cutout Diameter: 8 5 /
32
" (207mm)
Shipping Weight: 10 lbs. (4.5kg) Pair
S621
TR
Tweeter: ¾" (19mm) Silk dome, Ferrofluid-cooled
Woofer: 6½" (165mm) Polypropylene cone, rubber surround, pivoting
Frequency Response: 50Hz – 20kHz ±3dB
Impedance: 8 Ohms nominal; 6 Ohms minimum
Power Handling: 5 watts minimum; 100 Watts maximum
Sensitivity: 88dB SPL (2.83V 1 meter)
Dimensions (Dia. x Depth): 9¾" (248mm) x 5 3 /
16
" (132mm)
Cutout Diameter: 8 5 /
32
" (207mm)
Shipping Weight: 9 lbs. (4.1kg) Pair
S623
TSQ
Tweeter: 1" (25mm) Silk dome, Ferrofluid-cooled, pivoting
Woofer: 6½" (165mm) Carbon fiber cone, rubber surround, pivoting
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 Ohms nominal; 6 Ohms minimum
Power Handling: 5 watts minimum; 135 Watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Adjustments: ±3dB Tweeter level
Dimensions (Dia. x Depth): 9¾" x 9¾” x 4 13 /
16
" (248mm x 248mm x 122mm)
Cutout Diameter: 8 5 /
32
" x 8 5 /
32
" (207mm x 207mm)
Shipping Weight: 10 lbs. (4.5kg) Pair
F i g u r e 8 :
P i v o t i n g t h e W o o f e r a n d T w e e t e r
Pivoting the Woofer Pivoting the Tweeter
Tweeter
Level Control
F i g u r e 9 :
T w e e t e r L e v e l C o n t r o l