Sharp AL-840 - Manual (Page 24)

22
3
Printer trouble?
USING OTHER INSTALLED DRIVERS
Windows 95/Windows 98/Windows NT 4.0:
1
Click the Start button.
2
Select Settings and then click Printers.
3
Right-click the AL-800 Series icon in the printer dialog box and then click Properties.
For this description, it is assumed that the mouse is configured for right hand
operation.
4
Click the Details tab (Ports tab – on Windows NT4.0) in the Properties dialog box,
select FILE: in the Print to the following port list box, and click the OK button.
5
Right-click the icon of the printer to be used and click Properties.
6
Click the Details tab (Ports tab – on Windows NT4.0) in the Properties window,
select LPT1 (or the currently used port), and click the OK button.
To use the AL-800 series again, perform the same procedure but select the
port to be used (for example, LPT1) in step 4.
Windows 3.1x:
1
Double-click the Control Panel icon in the Main window of Program Manager.
2
Double-click the Printers icon. The Printers window will then open.
3 Select AL-800 Series, and then click the Connect button.
4
Select File from the list of options in the Ports window, and then click the OK button.
5
Select the new printer you would like to use from the list in the Installed Printers
window, and then click the Connect button.
6
Select the printer port to use for the new printer, and then click the OK button.