Sharp AL-840 - Manual (Page 11)

9
1
Getting Started
INSTALLING THE PRINTER DRIVER SOFTWARE
Windows 3.1x:
1
Load paper into the paper tray of the printer. For loading of paper, see the section on
LOADING COPY PAPER in the copier operation manual.
2
Turn on the printer and then start Windows on your computer.
Before installing the printer driver, be sure to close all other applications which
may be open.
3
Insert the installation CD-ROM into a CD-ROM drive.
4
Choose File from the Menu bar in Program Manager, and then choose the Run…
command.
5
Type R:\SETUP (if the CD-ROM is designated as drive R) in the command line box
and then click the OK button.
6
Select a directory to which the printer driver will be installed and click the Next button.
To install it to the default directory, click the Next button.
7
A “printer port to be used” window will be displayed. Normally, LPT1 is automatically
set.
Then ensure that Yes is checked to use this printer as the default printer.
Click the Next button.
8
A "Confirm installation" window will be displayed. To continue installation, click Yes.
9
When the installation is complete, click the Yes button. Then restart Windows.