SMC Networks Barricade SMC7004ABR - Manual (Page 41)

C
ONFIGURING THE
B
ARRICADE
4-9
the Barricade in the client address pool.
WAN Configuration
Specify the WAN connection type required by your Internet
Service Provider, then click “More Configuration” to provide
detailed configuration parameters for the selected connection type.
Specify one of the first three options to configure a WAN
connection through the RJ-45 port (i.e., a connection to an xDSL
modem or Cable modem). Specify the “Dial-up on Demand”
option to configure a WAN connection through the serial port (i.e.,
a connection to an ISDN TA or PSTN modem).
Note: If WAN connections are configured for both the RJ-45 and
serial port, the serial port will be used as a backup Internet
connection if the primary RJ-45 WAN connection fails.