SMC Networks Barricade SMC7004ABR - Manual (Page 24)

I
NSTALLATION
2-4
SMC7008ABR
Figure 2-1. Front and Rear Panels
Item Description
Reset
Button Use this button to reset the power and restore the default
factory settings.
LEDs Power, WAN and LAN port status indicators.
(See Verify Port Status on page 2-10.)
LAN
Ports Fast Ethernet ports (RJ-45). Connect devices on your local
area network to these ports (such as a PC, hub or switch).
Printer
Port Parallel port (25-pins, D-type, female). Connect the shared
printer to this port.
WAN
Port WAN port (RJ-45). Connect your Cable modem, xDSL
modem, or an Ethernet router to this port.
COM
Port Serial port (9-pins, D-type, male). Connect your ISDN TA or
56K analog modem to this port.
Power
Inlet Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may cause
damage.
WAN Console Printer
100-240VAC 50-60Hz 0.5A 100-240VAC 50-60Hz 0.5A