Sherwood R-965 - Manual (Page 9)

ENGLISH
9
6. CONNECTING PREOUTs
• Use these jacks when adding additional power amplifiers.
• Connect the PREOUT jacks to the powered speakers or the power amplifiers connected to speakers respectively.
• When using only one surround back speaker, connect the SURROUND BACK LEFT jack to the power amplifier.
• If this is the case, you can connect the subwoofer without built-in amplifier to SURROUND BACK RIGHT terminals of the
power amplifier.(For details, refer to “When selecting the SUBWOOFER” on page 49.)
• To emphasize the deep bass sounds, connect a powered subwoofer.
• To enjoy deeper bass sounds, connect an additional powered subwoofer to the SUBWOOFER 2 jack.
Notes :
• After installing the speakers , first adjust the speaker settings according to your environment and speaker layout (For details,
refer to “SETTING THE SPEAKER SETUP” on page 46.)
• According to speaker settings, you cannot use either SURROUND BACK RIGHT jack or both of SURROUND BACK jacks.
5. CONNECTING 8CH DIRECT INs
• Use these jacks to connect the corresponding analog audio
and video outputs of a DVD player or a external decoder,
etc. that has 6, 7 or 8 channel audio and video outputs.
• In case of 6 or 7 channel outputs, do not connect both of
the SURROUND BACK L and R inputs or the SURROUND
BACK R input to this unit . (For details, refer to the
operating instructions of the component to be connected.)
CENTER SUBWOOFER
FRONT
R L
SURROUND
R L
SURR.BACK
R L
(COMPOSITE)
VIDEO OUT
S-VIDEO
OUT
Decoder with 6, 7 or 8 channel outputs
8 CH DIRECT OUTs
Additional powered
subwoofer
Power amplifiers
CENTER
FRONT
L
R
SURROUND
L
R
SURROUND BACK
L
R
powered
subwoofer
Center speaker
Front speakers
Surround speakers
Surround back speakers