Sherwood R-965 - Manual (Page 13)

13
ENGLISH
10. CONNECTING MULTI-ROOM SYSTEM KIT
• The multi-room system kit(sold separately ) is essential for operation from a remote location .
For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.
• IR IN jacks allow you to control this receiver from another room with the remote control unit.
• To control this receiver from another room with the remote control unit, connect the IR IN 1 or 2 jack to the output of the
connecting block.
• If this receiver is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot
enter, then operation with the remote control unit will not be possible. In such a case, connect the IR IN 1 or 2 jack to the
output of the connecting block.
• To control other compatible component from another room with the universal remote control unit, connect the IR OUT jack to
the IR emitter.
Connecting block
(Multi-room system kit)
output
Another room(Room 2)
This receiver
Main room
DVD player
In the cabinet
MUL MULTI CONTROL TI CONTROL MASTER VOLUME MASTER VOLUME
POWER STANDBY DECODING STEREO DIGITAL/ANALOG PURE AUDIO VIDEO AUDIO T.MON 8CH DIRECT
ON/ OFF
INPUT SELECTOR
IR receiver
(Multi-room system kit)
Connecting block
(Multi-room system kit)
output
This receiver
MUL MULTI CONTROL TI CONTROL MASTER VOLUME MASTER VOLUME
POWER STANDBY DECODING STEREO DIGITAL/ANALOG PURE AUDIO VIDEO AUDIO T.MON 8CH DIRECT
ON/ OFF
INPUT SELECTOR
IR receiver
(Multi-room system kit)
IR emitter
(Multi-room system kit)
RNC-500
• When this receiver is located inside a cabinet.
VIDEO 6
ROOM2 PHONO
TUNER
CD
AUX VIDEO 1
V IDEO 3
VIDEO 2
VOLUME
MUTE
VIDEO 4
V IDEO 5
VIDEO AUDIO