beautypg.com

Troubleshooting, Checklist before svc cals, Checklist before svc calls – Samsung SR8845 User Manual

Page 40

background image

40_

Troubleshooting

Troubleshooting

CHECkLIST BEFORE SVC CALLS

SYMPTOM

CHECkLIST

MEASURE TO TAkE

Robotic vacuum

cleaner does not
operate at all

before
cleaning.

Is the dust bin assembled?

Install the dust bin.

Is the Power Switch turned on?

Turn on the Power Switch.

Is cleaning mode (

) in the

display panel turned on?

Press the ( ) button. (To turn it
off, press and hold the ( ) button

down for 3 seconds or longer.)

Is the battery level flashing only

one level and is ‘LO’ displayed in

the display panel?

Lift up the robotic vacuum

cleaner, and manually dock the

robotic vacuum onto the charger

to charge it.

Robotic vacuum cleaner will not

operate when the battery in the

remote control is depleted.

Replace the batteries in the

remote control. (AAA type)

Robotic vacuum

cleaner stopped
operating while

cleaning.

Is the battery level flashing only

one level and is ‘LO’ displayed in

the display panel?

Lift up the robotic vacuum

cleaner, manually dock the

robotic onto

the charger to charge it.

Has the robotic vacuum cleaner

become hooked on wires on the

floor?

Turn off the Power Switch and

remove the wires.

Is the robotic vacuum cleaner

stuck to the floor where there is a

height difference?

- The driving wheel is lifted.

Turn off the Power Switch and

move the cleaning robotic

vacuum to another place to

clean.

Is there a thin towel (cloth)

wrapped around the driving

wheel?

Turn off the Power Switch and

remove the thin towel.

Is the robotic vacuum cleaner

stuck on the doorsill?

Turn off the Power Switch and

move the robotic vacuum cleaner

to another place to clean.

The suction

power is weak
while cleaning.

Check whether the dust bin

is full of dust.

Stop the robotic vacuum cleaner

and empty the dust bin.

Check whether the suction

inlet is clogged by foreign

substances.

Turn off the Power Switch and

remove the foreign substances

on the suction inlet.

Check whether the Filter is

clogged.

Clean the Filter well.

DJ68-00518G(SR8845)(EN)-0.0.indd 40

2010.2.9 2:54:22 PM