Samsung SR8845 - Manual (Page 36)

36_ Maintain tools and filter
Maintain tools and filter
CLEANING THE ROBOTIC VACUUM CLEANER
CLEANING THE POWER BRUSH
2. After checking whether there are any foreign
substances, press the hook that is fixing the brush cover
to separate it.
1. Separate the dust bin by pressing the dust Bin Eject
(PUSH) button.
You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
3. Lift the power brush up from the main unit.
4. Remove any foreign substances such as long hairs
or strings wrapped around the power brush using a
cleaning brush or a vacuum cleaner.
CAUTION
• Because the dust in the dust bin may come out,
separate the dust bin first before cleaning the power
brush.
5. When cleaning is complete, fix the Power Switch side of
the power brush first and then fix the other side of the
brush in the same way.
DJ68-00518G(SR8845)(EN)-0.0.indd 36 2010.2.9 2:53:51 PM