Samsung SR8845 - Manual (Page 28)

28_ Operating the cleaner
Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER
AUTO CLEANING
The robotic vacuum cleaner will move by itself and
automatically clean the house until cleaning is completed
once.
■
If cleaning begins when the robotic vacuum cleaner is docked with
the charger station, the time to return to the charger is decreased
since the robotic vacuum cleaner remembers its original position
while moving.
■
If the battery level becomes too low while cleaning, the robotic
vacuum cleaner will automatically return to the charger station and
resume cleaning after charging its battery. (Number of cleaning
operations resumed: Once)
While cleaning
When cleaning is
complete
Cancel the mode.
2
1 Set the mode.
Main unit button Remote control button Configuration Sequence

About the Resume Cleaning function
• If the robotic vacuum cleaner has evaluated
that cleaning is complete, the resume cleaning
function is not performed.
• If you move the robotic vacuum cleaner when it
is being charged or press a button, the robotic
vacuum cleaner judges cleaning to be complete
and does not resume cleaning.
1time
Do not move the robotic vacuum cleaner when it is cleaning or press a button
while it is cleaning. Otherwise, the robotic vacuum cleaner judges cleaning to be
complete and starts cleaning again from the beginning.
CAUTION
NOTE
DJ68-00518G(SR8845)(EN)-0.0.indd 28 2010.2.9 2:53:31 PM