Samsung SR8845 - Manual (Page 34)

34_ Maintain tools and filter
Maintain tools and filter
CLEANING THE ROBOTIC VACUUM CLEANER
PLEASE KEEP THE CLEANING AND MAINTENANCE METHODS IN MIND
■
When the Power Switch is damaged, please contact the
service agent so that it does not cause any accidents.
■
Do not use any means or mechanical devices not
installed by the manufacturer that could accelerate the
deformation of the robotic vacuum cleaner.
CLEANING THE SENSOR WINDOW AND THE CAMERA
You must turn off the Power Switch at the bottom of
the main unit before cleaning the robotic vacuum.
■
Never spray water, thinner, benzene etc. directly onto the
main unit of robotic vacuum cleaner.
■
Always turn off the power switch at
the bottom of the main unit before
cleaning the robotic vacuum. The
robotic vacuum cleaner could operate
suddenly and cause an injury.
■
Lightly wipe the sensor window or
camera using a soft cloth.
Front Sensor Window and
Camera
Rear Sensor Window Cliff Sensor Window
Camera
Display Panel
Front Sensor window
DJ68-00518G(SR8845)(EN)-0.0.indd 34 2010.2.9 2:53:45 PM