Samsung HT-C550-XAC - Manual (Page 30)

30
English
Setup
NOTE
ASC setup can be made when there is no disc in
the product.
You cannot adjust the volume during the ASC
setup.
If the auto sound microphone is disconnected
during the ASC setup, the setup will be canceled.
When ASC function is activated, the DSP/EQ,
Dolby Pro Logic ll and P. BASS sound effects will
not work.
If the product is connected to external devices or
other components (such as an iPod, AUX, D.IN),
the ASC Setup may not work exactly.
Auto Sound Calibration
You will hear either the ASC mode or the User
Speaker Settings.
ON: You will hear sound in the Auto Sound
Calibration(ASC) mode.
OFF: You will hear sound in the Speaker Setting
value you set.
Settings
Move Select Return
Change Select Return
Auto Sound Calibration : ON ►
Auto Sound Calibration Setting
Auto Sound Calibration
Auto Sound Calibration Setting
Plug the ASC microphone into the ASC input
jack.
Place the ASC microphone at the listening
position.
Auto Sound Calibration will be automatically set
up in the following sequence:
Press the RETURN button to cancel the Auto
Sound Calibration Setting.
When the message "REMOVE MIC" appears on
the display, unplug the ASC microphone.
✎





•
•
1.
2.
•
•
•
NOTE
Setting the Auto Sound Calibration function
takes about 3 minutes.
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
You can select either off, 2/8, 4/8, 6/8, Full.
AV-SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.
HDMI AUDIO
The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
NOTE
The default setting of this function is HDMI Audio
Off.
HDMI Audio is automatically down-mixed to 2ch
for TV speakers.
When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.
In the iPod mode, this menu is not available.
EQ Optimizer
Off: Turn EQ Optimizer off.
On:
✎

•
•
•
•
✎




•
•
HT-C550-XAC_0122.indd 30 HT-C550-XAC_0122.indd 30 2010-01-23 2:25:51 2010-01-23 2:25:51