Spirit Z300 - Manual (Page 13)

Z9 12
Step 3. Before running, press “ENTER” button to set count down time. The range is from
10:00 to 99:00.
Step 4. User can set profile values by themselves. Press “ENTER” to set speed and
incline values for the 20 columns.
Each section includes speed, press “FAST/SLOW” to adjust and incline,
press “UP/DOWN” to adjust the incline.
Step 5. Press START to start running after setting, or during setting process. Console will
automatically set speed and incline position. It will also save the settings.
Content of profile
Content of profile is speed value.
SPEED value • Max speed * percent of profile
INCLINE doesn’t have PROFILE, the value of incline will display in INCLINE window.
Preset program values as below:
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20
P2 SPEED 50 62.5 62.5 75 75 75 87.5 75 87.5 87.5 100 75 87.5 75 87.5 87.5 75 62.5 62.5 50
P2 INCLINE L1 L2 L3 L4 L4 L5 L4 L5 L5 L6 L4 L5 L4 L5 L6 L5 L4 L2 L2 L1
P3 SPEED 50 62.5 62.5 75 87.5 100 100 100 100 100 100 100 100 100 100 100 87.5 75 62.5 50
P3 INCLINE L1 L2 L3 L4 L4 L5 L6 L4 L5 L5 L4 L3 L4 L5 L6 L7 L5 L3 L2 L1
P4 SPEED 50 62.5 62.5 75 75 87.5 75 75 87.5 62.5 75 87.5 75 75 100 75 87.5 62.5 62.5 50
P4 INCLINE L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1 L1
P5 SPEED 62.5 62.5 75 75 75 75 87.5 87.5 87.5 100 100 87.5 87.5 87.5 75 75 75 62.5 62.5 62.5
P5 INCLINE L1 L2 L3 L4 L5 L7 L8 L7 L6 L5 L4 L4 L5 L6 L7 L7 L6 L4 L2 L1
P6 SPEED 50 62.5 62.5 75 87.5 62.5 62.5 87.5 62.5 75 100 62.5 75 100 62.5 75 87.5 62.5 62.5 50
P6 INCLINE L1 L2 L3 L4 L5 L3 L4 L6 L3 L4 L7 L3 L4 L8 L3 L4 L6 L4 L2 L1
For example: Setting 10MPH is P2 high speed, the speed will calculate through above formula and
show in program drawing.
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20
P2
SPEED
5
Mph
6.2
Mph
6.2
Mph
7.5
Mph
7.5
Mph
7.5
Mph
8.7
Mph
7.5
Mph
8.7
Mph
8.7
Mph
10
Mph
7.5
Mph
8.7
Mph
7.5
Mph
8.7
Mph
8.7
Mph
7.5
Mph
6.2
Mph
6.2
Mph
5
Mph
For example: Setting 8MPH is P2 high speed, the speed will calculate through above formula and
show in program drawing.
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20
P2
SPEED 4
Mph
5
Mph
5
Mph
6
Mph
6
Mph
6
Mph
7
Mph
6
Mph
7
Mph
7
Mph
8
Mph
6
Mph
7
Mph
6
Mph
7
Mph
7
Mph
6
Mph
5
Mph
5
Mph
4
Mph
For example: Setting 16KPH is P2 high speed, the speed will calculate through above formula and
show in program drawing.
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20
P2
SPEED 8
Kph
10
Kph
10
Kph
12
Kph
12
Kph
12
Kph
14
Kph
12
Kph
14
Kph
14
Kph
16
Kph
12
Kph
14
Kph
12
Kph
14
Kph
14
Kph
12
Kph
10
Kph
10
Kph
8
Kph
For example: Setting 10KPH is P2 high speed, the speed will calculate through above formula and
show in program drawing.