Sony UP-D23MD - Manual (Page 8)

Get
ting St
ar
te
d
Installing the Printer Driver
8
Installing the Printer
Driver
Install the printer driver provided with the printer. For
detailed instructions on how to install the printer driver,
refer to the Readme.txt file on the printer driver installer
disc.
About USB (Universal Serial Bus) Specification
Revision 2.0
• The UP-D23MD complies with the USB 2.0
specification.
• USB 2.0 is a newer standard than USB 1.1, but
provides backward compatibility.
• USB 2.0 supports Hi-speed USB, in addition to the
existing Full (Low) speed.
• The UP-D23MD can be connected as Full-speed in a
USB 1.1 environment. However, to use the UP-
D23MD with Hi-speed USB functions in a USB 1.1
environment, the following requirements must be met.
– Computer
A computer which supports Hi-speed USB
(conforming to the USB 2.0 specification)
a)
– OS
Windows2000/XP
b)
– USB 2.0 device driver
USB 2.0 device driver produced by Microsoft
Corporation. (Operation using USB 2.0 drivers
other than ones produced by Microsoft Corporation
is not guaranteed.)
– USB 2.0 cable
Use the 2-m cable supplied with the UP-D23MD.
a)
Operations of all of devices which conform to USB
2.0, or all USB 2.0 extension boards/extension
cards cannot be guaranteed.
b)
If your OS is Windows98/ME, up to Full-speed
USB is supported.
Note
When the UP-D23MD is connected to the computer
with the power turned on, do not turn your computer to
standby mode (suspend status) or in pause mode. Doing
so may cause a malfunction of the operation.